Fields of Use

The float switch can be used to control the level of nonaggresive liquids in domestic and industrial plants (tanks, wells, cesspools, sewages).The float switch has an high resistance to the major part of the acids and mineral bases, up to a 10% concentration. The float casing is constttued by an anti-shock polypro­pylene material and It can be drawn upon solvents at ambient temperature.

Functions

The float switch mounting and application is extremly simple. De­pending on the demanded operation densty, welghlness parts are regulated and electrical connections are applied. After putting it in water, the system cycle begins. The item is completely waterproof.

Standard Electrical Contacts

Opening and closing circuit operations are caused from internal silver contact micro switches

Protection Degree

IP68 (Maximum immersion, 20 m)

Maximum Working Temperature

80 °С

Standart Cable Lengths

0,60 m., 1,60 m., 3,00 m., 5,00 m., 10,00 m., 15,00 m. By request can be produced any other lenght floaters.

Nominal Voltage

220 Volt AC.

Frequency

50 Hz.